Hey, your browser is out of date!

We've noticed you're currently using an old version of IE.
We really recommend you update your browser.
Surgical Gown - standard LSurgical Gown - standard L
Products  |  
Protective gear
  |  
1087

Surgical Gown

EN 13795:2019
STANDARD
STANDARD
STANDARD

Sterile and suitable for general protection in medical and surgical environments. Used as a barrier to liquid and microbial penetration between patients and medical staff, medical environments and surgical devices.

Product informationSpecificationsInstructionsSymbolsPackagingDocuments
No items found.

Product information

REF 
1087

Suitable for general protection in medical and surgical environments. Used as a barrier to liquid and microbial penetration between patients and medical staff, medical environments and surgical devices. The gown is made from lightweight, breathable non-woven material that ensures fluid resistance.

  • Knitted polyester cuffs
  • Individually packaged
  • Ethylene oxide (EO) sterilization process
  • Shelf life 3 years

Specifications

  • Model: Standard
  • REF: 1087 and 1088
  • Quantity: 1 pcs
  • Colour: Blue, white cuffs
  • Weight: 133 g
  • Measurements: see illustration
  • Standard: EN 13795:2019
  • MDD: Class I
  • PPE: Cat I
  • Manufacturer: 3A Medical
  • Main fabric: SMMS non-woven polypropylene 92%
  • Cuffs: Polyester and cotton 5%
  • Other: Velcro 3%
  • Allergens: Free from latex, PVC and nickel

Instructions

Donning procedure

1. Clean and disinfect your hands. Open the package in an area without risk of contamination. 2. Put both hands into armholes. Hold the gown away from the body, and allow it to unfold completely. 3. Inspect the gown for any rips, tears, holes or other damage. If it is damaged; discard the gown and restart the donning process. 4. Slip both arms into armholes and sleeves; keep hands at shoulder level and away from the body. 5. Pull the cuff to thumb level for open glove donning, and push the hands to the edge of the cuff for closed glove donning. 6. Assisting nurse pulls the gown over the shoulders, touching only the inside of the gown. 7. Assisting nurse secures the velcro strip in the neck and ties the inner waist belt of the gown. 8. The user put on medical gloves according to user instructions. 9. Hold the belt card with both hands, separate the left outer belt from the belt card and keep the belt in the left hand. Hand the belt card to the assisting nurse. 10. Rotate to the left while the assisting nurse extends the outer belt to its full length. 11. Retrieve the outer belt by pulling it out of the belt card and tie it together with the outer belt on the left-hand side.

Doffing procedure

12. Keep medical gloves on. Cross your arms and grasp the shoulders. 13. Pull the gown away from the body to break the neck closure. 14. Grasp the waist and pull away from the body to break waist closure. 15. Roll the gown down into a ball - inside out - to ensure fluids and contaminants are contained. 16. Discard the gown and your gloves according to medical waste regulations. 17. Clean and disinfect hands after use.

Symbols

No items found.
No items found.

Packaging

Consumer
Material
Paper / plastic bag
Measurements
L: 24 cm W: 18 cm H: 4 cm
Weight
130 g
Pcs
1 pcs
Transport
Material
Cardboard
Measurements
L: 57 cm W: 39 cm H: 30 cm
Weight
6,3 kg
KFP / TFP
40
Pcs / TFP
40
EU-Pallet
TFP / pallet
12
KFP / pallet
480
Pcs / pallet
480

Package

Consumer
Material
Paper / plastic bag
Measurements
L: 24 cm W: 18 cm H: 4 cm
Weight
130 g
Pcs
1 pcs
TRANSPORT
Material
Cardboard
Measurements
L: 57 cm W: 39 cm H: 30 cm
Weight
6,3 kg
KFP / TFP
40
Pcs / TFP
40
EU-PALLET
TFP / pallet
12
KFP / pallet
480
Pcs / pallet
480

Dokument

No items found.

Contact

Ideon Science Park
SE-223 70 Lund
info@gibsonmedical.se

Sweden
tel +46 10 330 50 50
© Gibson Medical AB